(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
1
2
3
Repeat step 2 if necessary.
To return to the previous menu, press
.
To exit from the menu, press
DISP
or
MENU
.
Menu item
Selectable setting (Initial: [XX])
DEMO
For settings,
'
page 3.
PRO EQ
For settings,
'
page 12.
AUDIO
FADER
*1*2
R06 — F06
[00]
: Adjusts the front and rear speaker output balance.
BALANCE
*2
L06 — R06
[00]
: Adjusts the left and right speaker output balance.
BASS BOOST
+01
/
+02
: Select your preferred bass boost level.
[OFF]
: Cancels.
LOUD
(Loudness)
[LOW]
/
HIGH
: Boosts low or high frequencies to produce a well-balanced
sound at a low volume level.
OFF
: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05
[00]
: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (
“
VOL ADJ FIX
”
appears if
“
FM
”
is selected.)
L/O MODE
(Line output
mode)
Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
SUB.W
: Subwoofer
[REAR]
: Rear speakers
SUB. W
*3
(Subwoofer)
OFF
: Cancels.
[ON]
: Turns on the subwoofer output.
SUB.W LPF
*4
(Subwoofer low-
pass filter)
[THROUGH]
: All signals are sent to the subwoofer.
LOW 55Hz
/
MID 85Hz
/
HIGH 120Hz
: Audio signals with frequencies lower
than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL
*4
(Subwoofer level)
-08 — +08
[00]
: Adjusts the subwoofer output level.
BEEP
(Keytouch tone)
[ON]
/
OFF
: Activates or deactivates the keypress tone.
TEL MUTING
*5
(Telephone
muting)
ON
: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).
[OFF]
: Cancels.
AMP GAIN
(Amplifier gain)
LOW POWER
: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]
: The maximum volume level is 50.
*1
If you are using a two-speaker system, set the fader level to “00”.
*2
This adjustment will not affect the subwoofer output.
*3
Displayed only when <L/O MODE> is set to <SUB.W>.
*4
Displayed only when <SUB.W> is set to <ON>.
*5
This setting does not work if <BT ADAPTER> is selected for <AUX> of <SRC SELECT>.
Menu operations
Menu operations
ENGLISH
ޓ
|
13
2012/12/14
ޓ
21:33:4
KD-X200_J_EN
