ENGLISH
13
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Using Other Applications
JVC Remote application
You can control the JVC car receiver from the following device using
JVC Remote application.
• KD-T912BT: iPhone/iPod touch (via Bluetooth or via USB input terminal)
or Android device (via Bluetooth)
• KD-T712BT: Android device (via Bluetooth)
For more information, visit <http://www.jvc.net/cs/car/>.
Preparation:
Install the latest version of JVC Remote application on your device before
connecting.
Start using JVC Remote application
1
Start up the JVC Remote application on your device.
2
Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 14)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 9)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 14)
(Make sure the USB input terminal is not connected to any device.)
3
Select the device to use from the menu.
See the following “Settings to use JVC Remote application”.
For KD-T912BT: By default,
[ANDROID]
is selected. To use iPhone/
iPod touch, select
[YES]
for
[IOS]
.
Settings to use JVC Remote application
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[REMOTE APP]
[SELECT]
(For KD-T912BT)
Selects the device (
[IOS]
or
[ANDROID]
) to use the application.
[IOS]
[YES]
: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ;
[NO]
: Cancels.
If
[IOS]
is selected, select iPod BT source (or iPod USB source if your iPhone/
iPod touch is connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID]
[YES]
: Selects Android device to use the application via Bluetooth. ;
[NO]
: Cancels.
[ANDROID
LIST]
Selects the Android device to use from the list.
• For KD-T912BT: Displayed only when
[ANDROID]
of
[SELECT]
is set to
[YES]
.
[STATUS]
Shows the status of the selected device.
[IOS CONNECTED]
: You are able to use the application using the iPhone/
iPod touch connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]
: No iOS device is connected to use the application.
[ANDROID CONNECTED]
: You are able to use the application using the Android
device connected via Bluetooth.
[ANDROID NOT CONNECTED]
: No Android device is connected to use the
application.
JS_JVC_KD_T912BT_M_EN_1.indd 13
JS_JVC_KD_T912BT_M_EN_1.indd 13
5/31/2019 12:20:26 PM
5/31/2019 12:20:26 PM
