18
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
Wiring connection
Car fuse block
Ignition switch
Light blue/yellow
Blue/white:
To amplifier
Blue:
To power antenna
Make this connection if your vehicle factory wiring harness
does not have “12 V ignition switch” wire.
Separate red wire
To the steering wheel remote
control adapter
Fuse (10 A)
Antenna terminal
Factory wiring
harness (vehicle)
Black: Ground
Yellow: Battery 12 V
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Purple: Rear speaker (right)
Purple/black
Join the same color wires together.
Red: Ignition 12 V
Orange/white: Illumination
Blue/white: Remote (12 V
350 mA)
Brown (not used)
Green: Rear speaker (left)*2
Green/black*2
*1 Firmly connect the ground wire of the amplifier to the car’s
chassis to avoid damaging the unit.
*2 You can also connect a subwoofer speaker directly using
this lead without an external subwoofer amplifier. For
setting, see page 11.
Custom wiring harness
(separately purchased)
Vehicle
dashboard
Recommended connection
IMPORTANT
We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
JVC Amplifier*1
Signal cord (not supplied)
Remote wire (not supplied)
Rear output
Front output
Subwoofer output
JS_JVC_KD_T406M_M2_EN_1.indd 18
JS_JVC_KD_T406M_M2_EN_1.indd 18
6/8/2018 10:05:33 AM
6/8/2018 10:05:33 AM
