KD-SX9350,KD-SX990
1-14 (No.49781)
2.2.7 Removing the pickup unit
(See Figs.14 to 18)
• Prior to performing the following procedure, remove the top
cover, connector board and chassis unit.
(1) Remove the screw
D
and pull out the pu. shaft holder from
the pu. shaft.
(2) Remove the screw
E
attaching the feed sw. holder.
(3) Move the part
e
of the pickup unit upward with the pu. shaft
and the feed sw. holder, then release the joint
f
of the feed
sw. holder in the direction of the arrow. The joint
g
of the
pickup unit and the feed rack is released, and the feed sw.
holder comes off.
(4) Remove the pu. shaft from the pickup unit.
(5) Remove the screw
F
attaching the feed rack to the pickup
unit.
2.2.8 Reattaching the pickup unit
(See Figs.14 to 17)
(1) Reattach the feed rack to the pickup unit using the screw
F
.
(2) Reattach the feed sw. holder to the feed rack while setting
the joint
g
to the slot of the feed rack and setting the joint
f
of the feed rack to the switch of the feed sw. holder correct-
ly.
(3) As the feed sw. holder is temporarily attached to the pickup
unit, set to the gear of the joint
g
and to the bending part of
the chassis (joint
h
) at a time.
CAUTION:
Make sure that the part i on the underside of the feed
rack is certainly inserted to the slot j of the change lock
lever.
(4) Reattach the feed sw. holder using the screw
E
.
(5) Reattach the pu. shaft to the pickup unit. Reattach the pu.
shaft holder to the pu. shaft using the screw
D
.
Fig.15
Fig.16
Fig.17
Fig.18
Feed sw. holder
E
Joint g
Joint f
Part e
Feed sw. holder
Part e
Pickup unit
Feed rack
Feed sw. holder
D
E
Joint f
Pu. shaft holder
Pu. shaft
Pickup unit
Joint h
Part i
Slot j
Joint g
F
Feed rack
Pickup unit
Joint f
Joint g
Feed rack
Pickup unit
Feed sw. holder
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
