JVC KD-SX921R Service Manual Download Page 18

Page: 18 / 63

1-18

KD-SX992R/KD-SX921R

Prior to performing the following procedure, remove
the top cover, the chassis unit, the top plate
assembly and the pickup unit.

Pull out the feed gear.

Move the loading plate assembly in the direction of
the arrow to release the slide plate from the two slots
j’ of the chassis rivet assembly.

Detach the loading plate assembly upward from the
chassis rivet assembly while releasing the joint k’.
Remove the slide hook and the loading plate spring
from the loading plate assembly.

Pull out the loading gear (2) and remove the change
lock lever.

Remove the E-washer and the washer attaching the
changer gear (2).

The changer gear (2), the changer gear spring and
the adjusting washer come off.

Remove the loading gear (1).

Move the hang plate rivet assembly in the direction
of the arrow to release from the three shafts of the
chassis rivet assembly upward.

Detach the loading gear plate rivet assembly from
the shaft of the chassis rivet assembly upward while
releasing the joint l’.

Pull out the loading gear (4).

10.

Removing the gears (See Fig.33 to 36)

Fig.33

Fig.34

Fig.36

Fig.35

Slot j'

Joint k'

Feed gear

Loading plate assembly

Slide plate

Joint l'

Loading gear (4)

Loading gear (2)

Loading gear (4)

Loading gear (2)

Loading gear (1)

Change gear (2)

Loading gear plate
rivet assembly

E-washer

Washer

Shafts

Change plate
rivet assembly

Loading plate assembly

Loading plate spring

Loading gear plate rivet assembly

Chassis rivet assembly

Slot j'

Joint k'

Slide plate

Slide hook

Adjusting washer

Change plate
rivet assembly

Change lock lever

www. xiaoyu163. com

QQ 376315150

TEL 13942296513

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

Summary of Contents for KD-SX921R
































































Search results

Summary of Contents for KD-SX921R

Reviews:

Related manuals for KD-SX921R

Brands by name

Popular brands

JVC KD-SX921R, Service Manual

Search results

Summary of Contents for KD-SX921R

Reviews:

Related manuals for KD-SX921R

Brands by name

Popular brands