background image

ENGLISH

6

3

• Selects the preset stations while listening to

the radio.
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.

• Skips to the previous disc while listening to

the CD changer.
Each time you press the button, the disc
number decreases, and the selected disc
starts playing.

4

Functions the same as the control dial on the
main unit.

NOTE:

This button does not function  for the
preferred setting mode adjustment.

5

Selects the sound mode (C-EQ).
Each time you press the button, the sound
mode (C-EQ) changes.

6

Selects the source.
Each time you press the button, the source
changes.

7

• Searches stations while listening to the radio.
• Fast-forwards or reverses the track if pressed

and held while listening to a disc.

• Skips to the beginning of the next track or

goes back to the beginning of the current (or
previous) tracks if pressed briefly while
listening to a disc.

Remote controller

1

• Turns on the unit if pressed when the unit is

turned off.

• Turns off the unit if pressed and held until “SEE

YOU” appears on the display.

• Drops the volume level in a moment if pressed

briefly.
Press again to resume the volume.

2

• Selects the band while listening to the radio.

Each time you press the button, the band
changes.

• Skips to the next disc while listening to the

CD changer.
Each time you press the button, the disc
number increases, and the selected disc
starts playing.

SOUND

VOL

VOL

SOURCE

R

F

U

D

1

2

3

4

6

7

5

ATT

RM–RK50

EN05-06.KD-SX8250_SX780[J]f.pm5

22/12/01, 10:36 AM

6

Summary of Contents for KD-SX780





























Reviews: