background image

18

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

Symptoms

Remedies/Causes

General

•  Sound cannot be heard from the speakers.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

•  The unit does not work at all.

Reset the unit (see page 3).

FM/AM

•  SSM automatic presetting does not work.

Store stations manually.

•  Static noise while listening to the radio.

Connect the antenna firmly.

Disc playback

•  Disc automatically ejects.

Insert the disc correctly.

•  CD-R/CD-RW cannot be played back.
•  Tracks on the CD-R/CD-RW cannot be 

skipped.

•  Insert a finalized CD-R/CD-RW.
•  Finalize the CD-R/CD-RW with the component which 

you used for recording.

•  Sound and pictures are sometimes 

interrupted or distorted.

•  Stop playback while driving on rough roads.
•  Change the disc.
•  Check the cords and connections.

•  No playback picture appears on the 

monitor.

Parking brake wire is not connected properly. 
(See Installation/Connection manual.)

•  No picture appears on the monitor at all.

•  Connect the video cord correctly.
•  Select a correct input on the monitor.

EN_KD-SV3704[UI].indb   18

EN_KD-SV3704[UI].indb   18

08.12.12   2:33:35 PM

08.12.12   2:33:35 PM

Summary of Contents for KD-SV3704























Reviews: