15
SETTINGS
Sound and monitor settings
Selecting a sound mode
You can select a preset sound mode suitable to the
music genre.
• Preset value for each sound mode is as follows:
Mode
Bass
(BAS)
Treble
(TRE)
Loudness
(LOUD)
ROCK
+2
+3
ON
POPS
+3
+1
OFF
CLASSIC
+1
-3
OFF
FLAT
0
0
OFF
EQ OFF
(Canceled)
0
0
—
• Sound mode is automatically canceled (“
EQ OFF
” is
selected) in the following cases:
– When activating/deactivating loudness (see
“Activating loudness” below).
– When adjusting bass/treble setting (see “Adjusting
the sound settings” on the right column).
Activating loudness
You can boost low and high frequencies to produce a
well-balanced sound at low volume level.
Loudness is activated and “
LOUD ON
” appears on
the display.
To cancel loudness, press the button again. “
LOUD
OFF
” appears on the display.
Adjusting the sound settings
You can adjust the sound characteristics to your
preference.
1
2
VOL
Adjusts the volume. (0 to 50)
BAS
Adjusts the bass. (–6 to +6)
TRE
Adjusts the treble. (–6 to +6)
BAL
Adjusts the left and right speaker balance.
(L6 to R6)
FAD
*
2
Adjusts the front and rear speaker balance.
(R6 to F6)
ADJ
*
1
Adjusts the output level of the external
component. (0 to 3)
*
1
This item is shown only when “AUX IN” is selected as
the source.
*
2
If you are using a two-speaker system, set the fader
level to “0.”
Selecting the color system
Select the appropriate color system according to the
type of the monitor connected.
While playing a VCD...
The setting appears on the monitor.
PAL
For the PAL monitor
NTSC
For the NTSC monitor
PAL60
For watching an NTSC disc on a PAL monitor
AUTO
Automatically selects the appropriate color
system.
PAL
NTSC
PAL60
AUTO
[Turn]
EN_KD-SV3704[UI].indb 15
EN_KD-SV3704[UI].indb 15
08.12.12 2:33:33 PM
08.12.12 2:33:33 PM
