JVC KD-SH1000E, Service Manual

Page: 19 / 77

(No.MA255)1-19
3.2.8 Removing the rod (L), rod (R) and roller assembly
(See Figs.15 and 16)
• Remove the mechanism control board, top cover, mechanism
section, front unit and loading arm assembly.
(1) From the bottom side of the loading arm assembly, release
the rod (L) and (R) from the joints r . (See Fig.15.)
(2) Remove the roller assembly from the loading arm assem-
bly. (See Fig.16.)
(3) Remove the two collars and washer from the roller assem-
bly. (See Fig.16.)
Caution:
After attaching the roller assembly to the loading arm assem-
bly, attach the rod (L) and (R). Then attach the rods to the right
and left collars of the roller assembly. (See Fig.15.)
Fig.15
Fig.16
r
r
r
r
Rod(R)
Loading arm assembly
Rod(L)
Collar
Collar
Rod(R) Rod(L)
Roller assembly
Roller assembly
Washer
Collar
Collar
Rod(L)
Loading arm assembly
Rod(R)