JVC KD-SH1000E, Service Manual

Page: 10 / 77

1-10 (No.MA255)
3.1.4 Removing the front chassis assembly
(See Fig 7, 8)
• Prior performing the following procedure, remove the front
panel assembly, heat sink and top chassis assembly.
(1) From the both sides of the top chassis assembly, remove
the two screws F attaching the front chassis assembly.
(2) Remove the front chassis assembly from the top chassis
assembly.
Fig.7
Fig.8
3.1.5 Removing the CD mechanism assembly
(See Fig.9)
• Prior performing the following procedures, remove the front
panel assembly, heat sink and top chassis assembly.
Reference:
Remove the front chassis assembly as required.
(1) From the inside of the top chassis assembly, remove the
three screws G attaching the CD mechanism assembly.
(2) Release the mecha heat sink from the slots a on the mech-
anism control board and remove the mecha heat sink from
the main body.
(3) Take out the CD mechanism assembly from the top chas-
sis.
Fig.9
Top chassis assembly
Front chassis assembly
F
Top chassis assembly
Front chassis assembly
F
Top chassis
Mecha heat sink
G
G G
CD mechanism assembly
a
Mechanism control board