KD-S743R/KD-S741R
(No.49810)1-5
2.1.3 Removing the heat sink
(See Fig.4)
(1) Remove the two screws
B
and two screws
C
on the left
side of the main body.
Fig.4
2.1.4 Removing the bottom cover
(See Figs.5 and 6)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the body and release the two joints
c
, two joints
d
and joint
e
.
CAUTION:
Do not damage the main board when releasing the joint
e
us-
ing a screwdriver. (See Figs.5 and 6)
Fig.5
Fig.6
2.1.5 Removing the rear bracket
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
, one screw
E
and two screws
(2) Remove the rear bracket.
Fig.7
B
C
Heat sink
Joint c
Joint d
Joint e
Bottom cover
Joint d
Joint c
Joint e
Bottom cover
F
D
D
E
Rear bracket
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
