background image

11

ENGLISH

Playing a CD

Insert a CD into the loading slot.

The unit turns on, draws
the CD and starts
playback automatically.

Note on One-Touch Operation:

When a CD is already in the loading slot, pressing
CD turns on the unit and starts playback
automatically.

All tracks will be played repeatedly until you stop
playback.

CD OPERATIONS

Note:

When a CD is inserted upside down, “EJECT”
appears on the display and the CD automatically
ejects.

To stop play and eject the CD

Press 

0

.

CD play stops and the CD automatically ejects
from the loading slot. The source changes to the
tuner (you will hear the last received station.)
• If you change the source, CD play also stops

(without ejecting the CD).
Next time you select “CD” as the source, CD
play starts from where playback has been
stopped previously.

Notes:

• If the ejected disc is not removed for about

15 seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(CD play will not start this time.)

• You can eject the CD even when the unit is turned

off.

About mistracking:

Mistracking may result from driving on extremely
rough roads. This does not damage the unit and
the CD, but will be annoying.
We recommend that you stop CD play while
driving on such rough roads.

Elapsed playing time

Current track

Total track number
of the inserted disc

Total playing time
of the inserted disc

The CD–in indicator lights up.

The CD–in indicator flashes.

SEL

LOUD

DISP

SSM

SCM

MODE

7

9

10

12 RND

11 RPT

8 MO

AM

CD

FM

EN11-13KD-S6060[E_EX]f.p65

7/28/03, 5:41 PM

11

Summary of Contents for KD-S6060













































































Reviews: