JVC KD-S6060 Service Manual Download Page 16

Page: 16 / 76

1-16 (No.MA028)

3.2.9

Removing the trigger arm
(See Figs.19 and 20)

• Prior to performing the following procedure, remove the top

cover, connector board and clamper unit.

(1) Turn the trigger arm in the direction of the arrow to release

the joint

and pull out upward.

CAUTION:

When reassembling, insert the part m and n of the trigger
arm into the part

and

at the slot of the chassis rivet

assembly respectively and join the joint k at a time.

Fig.19

Fig.20

3.2.10 Removing the top plate assembly

(See Fig.21)

• Prior to performing the following procedure, remove the top

cover, connector board, chassis unit, and clamper assembly.

(1) Remove the screw

(2) Move the top plate assembly in the direction of the arrow to

release the two joints r.

(3) Unsolder the wire marked s if necessary.

Fig.21

Joint k

Trigger arm

Chassis rivet assembly

Trigger arm

Chassis rivet
assembly

Part p

Part m

Part n

Part q

Top plate assembly

Joints r

Summary of Contents for KD-S6060













































































Search results

Summary of Contents for KD-S6060

Reviews:

Related manuals for KD-S6060

Brands by name

Popular brands

JVC KD-S6060, Service Manual

Search results

Summary of Contents for KD-S6060

Reviews:

Related manuals for KD-S6060

Brands by name

Popular brands