(No.49871)1-7
3.1.4 Removing the heat sink
(See Fig.4)
• Prior to performing the following procedure, remove the front
panel assembly as required.
(1) Remove the two screws
B
and screw
C
on the left side of
the main body.
Fig.4
3.1.5 Removing the rear bracket
(See Fig.5)
• Prior to performing the following procedures, remove the bot-
tom cover.
(1) Remove the three screws
D
, three screws
E
and two
screws
F
on the back side of the main body.
(2) Remove the rear bracket.
Fig.5
3.1.6 Removing the main board
(See Fig.6)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink and rear bracket.
(1) Remove the two screws
G
attaching the main board.
(2) Disconnect the connector
CN501
and remove the main
board.
Fig.6
B
C
Heat sink
E
Rear bracket
F
D
E
D
F
G
Main board
G
CN501
Summary of Contents for KD-S283
Page 37: ... M E M O ...
