13
ENGLISH
Continued...
Making a call
1
]
Enter “Hands-Free” screen.
2
]
Select a calling method or make
a setting. (DIALED/ RECEIVED/
MISSED CALL/ PHONEBOOK/
DIAL NUMBER/ VOICE/ SETTINGS)
3
If DIALED/ RECEIVED/ MISSED
CALL/
PHONEBOOK is selected in step
2
...
Turn the control dial to select the name/
phone number you want to call, then
press the control dial to confirm.
• “NO HISTORY” appears if there is no
history stored.
• “NO DATA” or “SEND P. BOOK”
j
“MANUALLY” appears depending on the
“P. BOOK SEL” settings. (page 14)
If DIAL NUMBER is selected in step
2
...
Enter the phone number to dial.
Turn the control dial to select a number
or character (see table below), press
4
/
¢
to move to the entry
position. Once you finished entering the
number, press the control dial to confirm.
If VOICE is selected in step
2
...
Speak the name (registered words) you
want to call when “WAIT VOICE”
=
“
[Device name]
” scrolls on the display.
• Press and hold
to activate voice
dial operation directly if only one phone
is connected.
If two phones are connected, pressing
and holding
will enter “Phone list”
screen. Turn the control dial to select a
phone to activate voice dial operation,
then press to confirm.
• Only accessible when the connected
mobile phone has the voice recognition
system.
• “NOT SUPPORT” appears if the
connected phone does not support this
feature.
To delete a registered device
1
Press and hold
MENU
.
2
Turn the control dial to select
<BLUETOOTH>, then press to confirm.
3
Turn the control dial to select
<DELETE PAIR>, then press to confirm.
4
Turn the control dial to select a device
you want to delete, then press to confirm.
5
Turn the control dial to select
<DELETE YES>, then press to confirm.
“DELETED” appears when the device is
deleted.
If <DELETE NO> is selected, the unit returns
to step
4
above.
Using a Bluetooth mobile phone
To connect/disconnect a registered device
1
Press and hold
MENU
.
2
Turn the control dial to select
<BLUETOOTH>, then press to confirm.
3
Turn the control dial to select
<CONNECT PH/ CONNECT AU> or
<DISCONNT PH/ DISCONNT AU>, then
press to confirm.
4
Turn the control dial to select a device
you want to connect/disconnect, then
press to confirm.
“CONNECTED/
DISCONNECT”
=
“[Device
name]” scrolls on the display when the
device is connected/disconnected.
EN02-29_KD-R728BT[J]_f.indd 13
EN02-29_KD-R728BT[J]_f.indd 13
1/12/11 4:47:41 PM
1/12/11 4:47:41 PM
