ENGLISH
11
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO
BASS BOOST
+01
—
+05
(
+01
): Selects your preferred bass boost level. ;
OFF
: Cancels.
LOUD
01
/
02
: Boosts low or high frequencies to produce a well-balanced
sound at low volume. ;
OFF
: Cancels.
SUB.W LEVEL
*
4
SPK-OUT
*
5
00
to
+06
(
+03
): Adjusts the output level of the
subwoofer connected via speaker lead. (
18
)
PRE-OUT
*
6
–08
to
+08
(
00
): Adjusts the output level of the
subwoofer connected to the lineout terminals (REAR/
SW) through an external amplifier. (
18
)
SUB.W
*
6
ON
/
OFF
: Turns on or off the subwoofer output.
SUB.W
LPF
*
4
THROUGH
: All signals are sent to the subwoofer. ;
LOW
55HZ
/
MID
85HZ
/
HIGH 120HZ
: Audio signals with frequencies lower than
55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.
SUB.W PHASE
*
4
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [
THROUGH
] is selected for
[
SUB.W
LPF
].)
FADER
R06
—
F06
(
00
): Adjusts the front and rear speaker output balance.
BALANCE
*
7
L06
—
R06
(
00
): Adjusts the left and right speaker output balance.
VOL
ADJUST
–15
—
+06
(
00
): Preset the initial volume level of each source
(compared to the FM volume level). Before adjustment, select the
source you want to adjust. (“VOL ADJ FIX” appears if FM is selected.)
AMP
GAIN
LOW
POWER
: Limits the maximum volume level to 25. (Select if
the maximum power of each speaker is less than 50 W to prevent
damaging the speakers.) ;
HIGH POWER
: The maximum volume level
is 35.
D.T.EXP
(Digital Track
Expander)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ;
OFF
: Cancels.
TEL
MUTING
*
8
ON
: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100). ;
OFF
: Cancels.
SPK/PRE
OUT
Depending on the speaker connection method, select the appropriate
setting to get the desired output. (
Speaker output settings
)
*
4
Displayed only when [
SUB.W
] is set to [
ON
].
*
5
Displayed only when [
SPK/PRE
OUT
] is set to [
SUB.W/SUB.W
].
*
6
Displayed only when [
SPK/PRE
OUT
] is set to [
REAR/SUB.W
] or [
SUB.W/SUB.W
].
*
7
This adjustment will not affect the subwoofer output.
*
8
Does not work if [
BT
ADAPTER
] is selected for [
AUX
] in [
SRC
SELECT
]. (
4
)
Speaker output settings
Select the output setting for the speakers [
SPK/PRE OUT],
base on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier. (
18
)
(For
KD-R671
)
Setting on
[
SPK/PRE OUT]
Audio signal through lineout terminal
FRONT
REAR/SW
REAR/REAR
Front speakers output
Rear speakers output
REAR/SUB.W
Front speakers output
Subwoofer output
SUB.W/SUB.W
Front speakers output
Subwoofer output
AUDIO SETTINGS
JS_JVC_KD_R671_M_EN_5.indd 11
JS_JVC_KD_R671_M_EN_5.indd 11
24/7/2015 5:15:21 PM
24/7/2015 5:15:21 PM
