24
ENGLISH
To select the scroll mode—
Scroll
You can scroll the disc information if it cannot be
displayed at a time.
• Once:
Scrolls only once.
• Auto:
Repeats the scroll
(in 5-second intervals).
• Off:
Cancels Auto Scroll.
To select the dimmer mode—
Dimmer
When you turn on the car head lights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
• Auto:
Activates Auto Dimmer.
• Off:
Cancels Auto Dimmer.
• On:
Always dims the display.
Note:
Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “On” or “Off.”
To adjust the display contrast level
—Contrast
You can adjust the display contrast level among 1
(dark) to 10 (bright).
To select the display illumination pattern
—LCD Type
You can select the display illumination patterns
according to your preference.
• Auto:
Positive pattern will be selected
during the day time (while the
headlights are turned off); on the
other hand, negative pattern will
be used during the night time
(while the headlights are turned
on.)
• Positive:
Positive (normal) pattern of the
display.
• Negative:
Negative pattern of the display.
To select the font on the display—Font Type
You can change the font types used on the display.
Select either “1” or “2” according to your preference.
To change the FM tuner selectivity
—
IF Filter
In some areas, adjacent stations may interfere
with each other. If this interference occurs, noise
may be heard.
• Auto:
When this type of interference occurs,
this unit automatically increases the
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
• Wide:
Subject to the interference from
adjacent stations, but sound quality will
not be degraded and the stereo effect
will not be lost.
To turn on/off the key-touch tone—
Beep
You can deactivate the key-touch tone if you do not
want it to beep each time you press a button.
• On:
Activates the key-touch tone.
• Off:
Deactivates the key-touch tone.
To select the external component to use
—
Ext Input
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component—CD changer or external component
—to use.
• Changer:
To use the CD changer.
• Line In:
To use the external component other
than CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
EN22-29LH1000[J]f.pm5
02.2.15, 1:41 PM
24
