12
ENGLISH
Tuning in to a preset station
You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on page 11.
Selecting a preset station directly
1
Select the band (FM1 – 3, AM).
2
Select the number (1 – 6) for the preset
station you want.
Note:
You can also use the
5
(up) or
∞
(down) buttons on
the unit to select the next or previous preset stations.
Each time you press the
5
(up) or
∞
(down) buttons,
the next or previous preset station is tuned in.
FM1
FM2
FM3
AM
3
Press and hold the number button (in
this example, 1) for more than 2
seconds.
4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
• A previously preset station is erased when a new station
is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
The display pattern automatically changes to the
small animation display and the preset number
flashes (then the previous display pattern resumes).
EN09-13LH1000[J]f.pm5
02.2.15, 1:29 PM
12
