1-8 (No.MA137)
3.1.4 Removing the side panel
(See Fig.4)
• Prior to performing the following procedure, remove the front
panel assembly as required.
(1) Remove the screw
B
and two screws
C
attaching the side
panel on the left side of the main body, and take out the
side panel.
Fig.4
3.1.5 Removing the rear bracket
(See Fig.5)
• Prior to performing the following procedure, remove the bottom
cover.
(1) Remove the three screws
D
, three screws
E
and three
screws
F
attaching the rear bracket on the back side of the
main body.
(2) Take out the rear bracket.
Fig.5
3.1.6 Removing the main board
(See Fig.6)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, side
panel and rear bracket.
(1) Remove the two screws
G
attaching the main board.
(2) Disconnect the connector
CN501
on the main board from
the main body and take out the main board.
Fig.6
Side panel
C
B
C
E
F
D
D
E
Rear bracket
F
Main board
G
G
CN501