JVC KD-G111 Service Manual Download Page 58

Page: 58 / 153

ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2.

CAUTION:

Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

CAUTION:

Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.

How to reset your unit

• This will reset the microcomputer. Your

preset adjustments will also be erased.

• If a disc is loaded, it will eject. Be careful

not to drop the disc.

How to forcibly eject a disc

If a disc cannot be recognized by the
receiver or cannot be ejected, ejects the disc
as follows.

• If this does not work, try to reset your

receiver.

• Be careful not to drop the disc when it

ejects.

For security reasons, a numbered ID card is provided with this receiver, and the same ID number is
imprinted on the receiver’s chassis. Keep the card in a safe place, as it will help the authorities to
identify your unit if stolen.

EN02-05_KD-G111[EY]f.indd 2

10/14/04, 1:37:30 PM

Summary of Contents for KD-G111


























































































































































Search results

Summary of Contents for KD-G111

Reviews:

Related manuals for KD-G111

Brands by name

Popular brands

JVC KD-G111, Service Manual

Search results

Summary of Contents for KD-G111

Reviews:

Related manuals for KD-G111

Brands by name

Popular brands