64
ENGLISH
4
Select a character.
• About the available
characters, see page
78.
5
Move the cursor to the next
(or previous) character position.
6
Repeat steps
3
to
5
until you finish
entering the name.
7
Finish the procedure while the last
selected character is flashing.
To erase entered characters
Insert spaces using the same procedure
described above.
Notes:
• When you try to assign a name to the 41st disc,
“Name Full” appears and you cannot enter the text
entry mode. In this case, delete unwanted names
before assignment.
• When the CD changer is connected, you can assign
names to CDs in the CD changer. These names can
also be shown on the display if you insert the CDs
in this unit.
Assigning names to the sources
You can assign names to CDs (both in this unit
and in the CD changer), and the external
component.
After assigning a name, it will appears on the
display when you select the source.
CDs*
Up to 32 characters (up to
40 discs)
External component
Up to 8 characters
*
You can assign a name only to conventional CDs.
1
Select a source you want to assign a
name to.
When you select a source, the
power automatically comes on.
2
While pressing DISP (D), press and
hold SEL (select) for more than
2 seconds.
3
Select the character set you want
while the first character position is
flashing.
Each time you press the button,
the character set changes as
follows:
Maximum number of
characters
Sources
Ex.: When you select “DISC” as the source
SRC
D
DISP
SEL
D
DISP
SEL
A – Z
(Upper case)
a – z
(Lower case)
Accented letters
(Lower case)
Accented letters
(Upper case)
0 – 9 & symbols
(Numbers)
ATT
EN57-65DV5000[E]f.p65
03.3.23, 18:55
64
