(No.MA248)1-15
3.1.9 Removing the switch board
(See Figs. 11 to 13)
• Remove the front panel assembly.
(1) From the back side of the front panel assembly, remove the
four screws
Q
attaching the rear cover. (See Fig.11.)
(2) Release the joints
j
attaching the rear cover to the front
panel assembly. (See Fig.12.)
(3) Release the joint
k
and take out the switch board while lift-
ing the switch board from the front panel assembly little by
little. (See Fig.13.)
Reference:
Remove the volume knob from the front side of the front panel
assembly at the same time.
Note:
Do not lose the compression springs when removing the
switch board. (See Fig.13.)
Fig.11
Fig.12
Fig.13
Q
Q
Q
Joints
j
Joints
j
Joints
j
Joints
j
Rear cover
Switch board
Joint
k
Front panel assembly