(No.MA248)1-13
3.1.6 Removing the main board
(See Figs.5 and 6)
• Remove the front panel assembly, bottom cover, front chassis
assembly and side heat sink.
Reference:
Remove the rear bracket as required.
(1) From the back side of the main body, remove the three
screws
G
attaching the main board. (See Fig.5.)
(2) From the bottom side of the main body, remove the three
screws
J
attaching the main board. (See Fig.6.)
(3) Disconnect the connector
CN961
on the main board from
the DVD mechanism assembly and take out the main
board from the main body. (See Fig.6.)
Fig.6
3.1.7 Removing the DVD mechanism assembly
(See Fig.7)
• Remove the front panel assembly, bottom cover, front chassis
assembly, side heat sink and main board.
(1) From the inside of the top chassis, remove the three
screws
K
attaching the DVD mechanism assembly.
(2) Take out the DVD mechanism assembly from the top chas-
sis.
Fig.7
CN961
J
J
Main board
J
K
K
K
DVD mechanism assembly
Top chassis