23
ENGLISH |
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Part list for installation
(A)
Faceplate
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
STEERING
WHEEL
REMOTE
KD-DB95BT
KD-DB65
Wiring connection
Light blue/yellow
Signal cord
(not supplied)
Remote wire
(not supplied)
To the steering wheel
remote control adapter
Fuse (10 A)
To Blue/white
wire of the wiring
harness
(D)
Antenna input terminal
(for FM/AM)
JVC Amplifier
IMPORTANT:
A custom wiring harness
(separately purchased) which is suitable for
your car is recommended for connection.
If your car does NOT have an ISO
terminal
( or )
* Custom wiring harness (separately
purchased)
For some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the
supplied power cord
(D)
as illustrated.
If the unit does not turn on with modified
wiring 1, use modified wiring 2 instead.
Y: Yellow
R: Red
Original wiring
Modified wiring 1
Modified wiring 2
Pin
Color and function
A2
*
Brown
: Tel muting
A4 Yellow
: Battery
A5 Blue/White
: Power control
A6 Orange/white
: Car light control switch
A7 Red
: Ignition (ACC)
A8 Black
: Earth (ground) connection
B1 Purple
: Rear speaker (right)
B2 Purple/black
B3 Gray
: Front speaker (right)
B4 Gray/black
B5 White
: Front speaker (left)
B6 White/black
B7 Green
: Rear speaker (left)
B8 Green/black
* For
KD-DB65
DAB antenna jack (SMB connector)
Front output
Rear/subwoofer output
Rear/subwoofer output
ISO connector
KD-DB95BT
MIC (Microphone input
terminal)
( 11)
JS_JVC_KD-DB95BT_E_f_EN.indd 23
JS_JVC_KD-DB95BT_E_f_EN.indd 23
11/22/2013 11:54:33 AM
11/22/2013 11:54:33 AM
