(No.MA304)1-13
3.1.5 Removing the Connection board assembly
(See Fig.10)
(1) From the bottom side of the DVD mechanism assembly, re-
lease the lock of the connector
CN965
on the Connection
board assembly and disconnect the card wire.
(2) Remove the three screws
J
attaching the Connection
board assembly on the DVD mechanism assembly. And re-
move the connection board assembly.
Fig.10
3.1.6 Removing the Rear bracket
(See Fig.11 and 12)
(1) Remove the one screw
K
attaching the Antenna cable, re-
move the one screw
L
attaching the CD-CH jack, remove
the one screw
M
attaching the IC bracket, remove the one
screw
N
attaching the Digital out jack and remove the two
screws
P
attaching the Rear bracket. (See Fig.11)
(2) Remove the three screws
Q
attaching the Wire holder.
(See Fig.11)
(3) Disconnect the connector wires from car cables connected
to connector
CN931
,
CN311
, and
CN361
on the Main
board assembly. (See Fig.12)
(4) Disconnect the connector wire from Fan connected to con-
nector
CN861
on the Main board assembly. (See Fig.12)
3.1.7 Removing the Main board assembly
(See Fig.12)
(1) Disconnect the card wire from connector
CN962
on the
Main board assembly.
(2) Disconnect the connector wire from Gear assembly con-
nected to connector
CN881
and
CN891
on the Main board
assembly.
(3) Remove the two screws
R
attaching the Main board as-
sembly.
Fig.11
Fig.12
J
J
CN965
K
L
M
N
P
P
Q
R
CN962
CN891
CN881
CN931
CN361
CN311
CN861
