53
REFERENCES
ENGLISH
Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/LINE OUT)
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT terminal
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a
decoder compatible with these multi-channel sources to this terminal, and set <
D. Audio Output
> correctly.
(
☞
page 42)
D. Audio Output
Playback disc
Output signals
Stream
Dolby Digital
PCM Only
DVD
48 kHz, 16/20/24 bits Linear PCM
48 kHz, 16 bits stereo Linear PCM
*
96 kHz, Linear PCM
48 kHz, 16 bits stereo Linear PCM
with
Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bits stereo
Linear PCM
with
DTS
DTS bitstream
with
MPEG Audio
MPEG bitstream
48 kHz, 16 bits stereo Linear PCM
Audio CD
,
Video CD
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
Audio CD
with
DTS
DTS bitstream
48 kHz, 16 bits stereo Linear PCM
DivX
with
Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bits stereo
Linear PCM
with
MPEG Audio
32/44.1/48 kHz, 16 bits Linear PCM
MPEG1/MPEG2
44.1/48 kHz, 16 bits Linear PCM
MP3/WMA
32/44.1/48 kHz, 16 bits Linear PCM
WAV
44.1 kHz, 16 bits stereo Linear PCM
*
Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the
discs are not copy-protected.
Upper and lower cases
Numbers and symbols
Characters shown on the
monitor
In addition to the roman alphabet (A – Z, a
– z), the following characters will be used
to show the various information on the
monitor.
• You can also use the following
characters to assign titles. (
☞
page 38).
EN49-54_KD-AVX11E_f.indd 53
EN49-54_KD-AVX11E_f.indd 53
06.12.25 7:03:43 PM
06.12.25 7:03:43 PM