12
ENGLISH
*
4
This adjustment will not affect the subwoofer output.
*
5
Range adjustment for super bass is adjustable only
when it is set to “S.BS ON.“
*
6
Depending on the amplifier gain control setting. (See
page 14 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
(except “SID”) listed in the table that follows.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps
2
and
3
to adjust other PSM
items if necessary.
5
Finish the procedure.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS
*
2
(bass), [–06 to +06]
Adjust the bass.
MID
*
2
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE
*
2
(treble), [–06 to +06]
Adjust the treble.
FAD
*
3
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL
*
4
(balance), [L06 to R06]
Adjust the left and right speaker balance.
S.BS
*
2
(super bass), [S.BS ON or S.BS OFF],
[01 to 05, initial: 03]
*
5
Maintain the richness and fullness of the bass sound
regardless of how low you set the volume.
SUB.W
*
1
(subwoofer), [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL
(volume), [00 to 30 or 50
*
6
]
Adjust the volume.
*
1
Displayed only when “L/O MODE” is set to “WOOFER”
(see page 14).
*
2
When you adjust the bass, mid-range, treble, or super
bass, the adjustment you have made is stored for the
currently selected sound mode (iEQ) including “USER.”
*
3
If you are using a two-speaker system, set the fader
level to “00.”
EN12-19KD-AR480_430[J]f.indd 12
EN12-19KD-AR480_430[J]f.indd 12
11/9/06 6:55:28 PM
11/9/06 6:55:28 PM
