JVC KD-AR370J Service Manual Download Page 246

Page: 246 / 309

ENGLISH

Symptoms

Remedies/Causes

DAB

• “noSIGNAL” appears on the display.

Move to an area with stronger signals.

• “RESET 8” appears on the display.

Connect this unit and the DAB tuner correctly
and reset the unit (see page 2).

• “ANTENANG” appears on the

display.

Check the cords and connections.

• The DAB tuner does not work at all.

Reconnect this unit and the DAB tuner correctly
and reset the unit (see page 2).

iPod/D. player playback

• The iPod or D. player does not turn

on or does not work.

•  Check the connecting cable and its connection.
•  Update the firmware version.
•  Change the battery.

• Buttons do not work as intended.

The functions of the buttons have been changed.
Press MODE before performing the operation.

• The sound is distorted.

Deactivate the equalizer either on the unit or the
iPod/D. player.

• “NO IPOD” or “NO DP” appears on

the display.

Check the connecting cable and its connection.

• Playback stops.

The headphones are disconnected during
playback. Restart the playback operation using
the control panel (see page 19).

• No sound can be heard when

connecting an iPod nano.

Disconnect the headphones from the iPod nano.

• No sound can be heard.
• “ERROR 01” appears on the display

when connecting a D. player.

Disconnect the adapter from the D. player. Then,
connect it again.

• “NO FILES” or “NO TRACK”

appears on the display.

No tracks are stored. Import tracks to the iPod or
D. player.

• “RESET 1” – “RESET 7” appears on

the display.

Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.

• “RESET 8” appears on the display.

Check the connection between the adapter and
this unit.

• The iPod’s or D. player’s controls do

not work after disconnecting from
this unit.

Reset the iPod or D. player.

Summary of Contents for KD-AR370J






















































































































































































































































































































Search results

Summary of Contents for KD-AR370J

Reviews:

Related manuals for KD-AR370J

Brands by name

Popular brands

JVC KD-AR370J, Service Manual

Search results

Summary of Contents for KD-AR370J

Reviews:

Related manuals for KD-AR370J

Brands by name

Popular brands