ENGLISH
57
REFERENCES
Symptom
Remedy/Cause
Bluetooth
*
• Bluetooth device does not detect the unit.
The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• The unit does not detect the Bluetooth device. • Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect
the device. (See page 29.)
• The unit does not make pairing with the
Bluetooth device.
• Enter the same PIN code for both the unit and target
device.
• Select the device name from “SPECIAL,” then try to
connect again. (See page 30.)
• Echo or noise occurs.
Adjust the microphone unit position.
• Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth audio device.
• Move the car to a place where you can get a better
signal reception.
• The sound is interrupted or skipped during
playback of a Bluetooth audio device.
• Reduce the distance between the unit and the
Bluetooth audio device.
• Disconnect the device connected for “BT-PHONE.”
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again.
• The connected audio device cannot be
controlled.
Check whether the connected audio device supports
AVRCP (Audio Video Remote Control Profile).
*
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
Continued on the next page
EN50-57_KD-ADV7380[J]2.indd 57
EN50-57_KD-ADV7380[J]2.indd 57
1/10/07 5:44:46 PM
1/10/07 5:44:46 PM