13
Use Voice Recognition
1
Press and hold
to enter Voice Recognition mode.
If two phones are connected, turn the volume knob to select the desired phone,
then press the knob.
2
Speak the name of the contact you want to call or the voice command to
control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the instruction
manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
Store a contact in memory
You can store up to 6 contacts.
1
Press
.
2
Turn the volume knob to select
[RECENT CALL]
,
[PHONEBOOK]
, or
[DIAL NUMBER]
,
then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
4
Press and hold one of the number buttons (
1
to
6
).
“MEMORY PX” flashes when the contact is stored.
To erase a contact from the preset memory, select
[DIAL NUMBER]
in step
2
and store
a blank number.
Make a call from memory
1
Press
.
2
Press one of the number buttons (
1
to
6
).
3
Press the volume knob to call.
“NO PRESET” appears if there are no contacts stored.
Delete a contact
Only when
[P.BOOK SEL]
is set to
[PB IN UNIT]
.
(
➜
12)
1
Press
.
2
Turn the volume knob to select
[RECENT CALL]
or
[PHONEBOOK]
, then press the
knob.
3
Turn the volume knob to select a contact or enter a phone number.
4
Press and hold
G
.
BLUETOOTH®
5
Turn the volume knob to select
[DELETE]
or
[DELETE ALL]
, then press the knob.
DELETE
: Selected name or phone number in step
3
is deleted.
DELETE ALL
: All names or phone numbers from the selected menu in step
2
is
deleted.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the Bluetooth
device and the unit.
1
While pressing and holding
, press and hold the volume knob for about
3 seconds.
“BLUETOOTH”
Ô
“CHECK MODE” appears. “SEARCH NOW USING PHONE”
]
“PIN IS 0000” scrolls on the display.
2
Search and select “JVC UNIT” on the Bluetooth device within 3 minutes.
3
Perform (A), (B) or (C) depending on what appears on the display.
(A) “PAIRING”
]
“XXXXXX” (6-digit passkey):
Ensure that the same passkey
appears on the unit and Bluetooth device, then operate the Bluetooth device
to confirm the passkey.
(B) “PAIRING”
]
“PIN IS 0000”:
Enter “0000” on the Bluetooth device.
(C) “PAIRING”:
Operate the Bluetooth device to confirm pairing.
After pairing is successful, “PAIRING OK”
]
“[Device Name]” appears and Bluetooth
compatibility check starts.
If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device to allow
phonebook access to continue.
The connectivity result flashes on the display.
• “H.FREE OK”*
1
and/or “A.STREAM OK”*
2
]
“[Device Name]” : Compatible
• “CONNECT FAIL”
Ô
“TRY CONNECT” : Not compatible
*
1
Compatible with Hands-Free Profile (HFP)
*
2
Compatible with Advanced Audio Distribution Profile (A2DP)
After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has been
deleted, and the unit exits check mode.
• To cancel check mode, turn off the unit by pressing and holding
L
SOURCE
.
• Delete the pairing on the Bluetooth device before pairing with this unit.
(
➜
10)
ENGLISH
EN_KD-A845BT[J]ff.indd 13
EN_KD-A845BT[J]ff.indd 13
12/24/12 10:58:33 AM
12/24/12 10:58:33 AM
