27
ENGLISH
Category
Menu item
Selectable setting, [
Initial:
Underlined
]
Audio
Fad/Bal
*
2,
*
3
Fader/balance
R6 – F6
, [
0
]
L6 – R6
, [
0
]
:
Fad
(fader): Press
5
/
∞
to adjust the front and
rear speaker output balance.
:
Bal
(balance): Press
4
/
¢
to adjust
the left and right speaker output balance.
Loud
Loudness
•
Loud 1/2/3
•
Off
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
Volume Adjust
Level –5 —
Level +5
,
[
Level 0
]
: Preset the volume adjustment level of each source
(except FM), compared to the FM volume level.
The volume level will automatically increase or
decrease when you change the source.
• Before making an adjustment, select the source
you want to adjust.
• “FIX” appears on the display if “FM” is selected as
the source.
Subwoofer
•
LPF
•
Level
•
Phase
: Turn the control dial to select the cutoff
frequency to the subwoofer.
Off
: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz
: Frequencies
higher than 55 Hz/85 Hz/120 Hz are cut off.
: Turn the control dial to adjust the subwoofer
output level.
Level 00
to
Level 08
[
Level 04
]
: Turn the control dial to select the subwoofer
phase.
0 Deg
(normal) or
180 Deg
(reverse)
HPF
High Pass Filter
Select the cutoff frequency to the front/rear speakers. Set this to
match the LPF settings.
•
62Hz/95Hz/
135Hz
•
Off
: Frequencies lower than 62 Hz/95 Hz/135 Hz are
cut off.
: All signals are sent to the front/rear speakers.
Beep
Keytouch tone
•
On
•
Off
: Activates the keypress tone.
: Deactivates the keypress tone.
Amplifier
Gain
*
4
•
High Power
•
Low Power
: Vol 00 – Vol 50
: Vol 00 – Vol 30 (Select if the maximum power
of each speaker is less than 50 W to prevent
damaging the speakers.)
*
2
If you are using a two-speaker system, set the fader level to <0>.
*
3
This adjustment will not affect the subwoofer output.
*
4
The volume level automatically changes to “Vol 30” if you change to <Low Power> with the volume
level set higher than “Vol 30.”
EN20-29_KD-R816_001A_2.indd 27
EN20-29_KD-R816_001A_2.indd 27
12/15/09 9:23:21 AM
12/15/09 9:23:21 AM
