Menu item
Selectable setting (Initial: [XX])
USB
*11
Drive Change
: Selects to change the drive when a device with multiple
drives is connected to the USB input terminal.
iPod Switch
*12
(iPod/iPhone control)
[Headunit Mode]
/
iPod Mode
/
Application Mode
:
For settings,
'
page 12.
Audiobooks
*12
Normal
/
Faster
/
Slower
: Selects the playback speed of the Audiobooks
sound file in your iPod/iPhone.
Initial selection depends on your iPod/iPhone setting.
Bluetooth
*13
Phone
*14
Connect
/
Disconnect
: Connects or disconnects the Bluetooth phone/
audio device. (
'
page 16)
Audio
Application
Connect
/
Disconnect
: Connects or disconnects the application in the
smart phone. (
'
page 17)
BT Audio
Switch
*15
Switches between
“
Bluetooth Audio
”
and
“
Bluetooth Pandora
”
.
Delete Pairing
For settings,
'
page 17.
Phonebook
Trans
Copies up to 400 numbers from the phonebook memory of a connected
phone to the unit via OPP.
Set PIN Code
Changes the PIN code (1 to 6-digits). (Default PIN code: 0000)
Turn the control dial to select a number, press
/
to move to the entry
position. After entering the PIN code, press the control dial to confirm.
Auto Connect
[On]
: Establishes connection automatically with the Bluetooth device when
the unit is turned on.
Off
: Cancels.
Initialize
[No]
: Cancels.
Yes
: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
Information
Connected Phone
/
Connected Audio
/
Connected Application
*16:
Displays connected phone/audio/application device name.
My BT Name
: Displays the unit name (JVC Unit).
My Address
: Shows address of USB Bluetooth Adapter.
Source Select
Ext Input
*17
Show
/
[Hide]
: Enables or disables
“
EXT IN
”
in source selection.
AM Source
*17
[Show]
/
Hide
: Enables or disables
“
AM
”
in source selection.
AUX Source
*17
[Show]
/
Hide
: Enables or disables
“
AUX In
”
in source selection.
Bluetooth
Audio
*18
[Show]
/
Hide
: Enables or disables
“
BT Audio
”
in source selection.
Software Version
Displays the firmware version of the unit.
*11 Displayed only when the source is “USB-1/USB-2”.
*12 Displayed only when the source is “iPod-1/iPod-2”.
*13 If the USB Bluetooth Adapter is not connected to the unit, “Please Connect BT Adapter”
appears on the display.
*14 <Connect> will not be displayed if two Bluetooth phones are connected at the same time.
*15 Displayed only when the source is “BT-1/BT-2”.
*16 Displayed only when a Bluetooth phone/audio player/application is connected.
*17 Displayed only when the unit is in any source other than the corresponding source “Ext Input/
AM Source/AUX Source”.
*18 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is
not “BT-1/BT-2”.
Menu operations
26
|
ޓ
ENGLISH
2012/2/6
ޓ
13:16:41
KD-R80BT_J_EN