EN
7
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is
set to “ON” (factory-preset).
Available when the Power Switch is set to “ ” or “
” and
no cassette is in the camcorder.
Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for
more than 1 minute after that, the demonstration will resume.
“DEMO MODE” remains “ON” even if the camcorder power
is turned off.
To cancel Automatic Demonstration:
1.
Set the Power Switch to “ ” while pressing down the Lock
Button located on the switch and press the
MENU
wheel.
The Menu Screen appears.
2.
Rotate the
MENU
wheel to select “
SYSTEM” and press
it. The SYSTEM Menu appears.
3.
Rotate the
MENU
wheel to select “DEMO MODE” and
press it. The Sub Menu appears.
4.
Rotate the
MENU
wheel to select “OFF” and press it.
5.
Rotate the
MENU
wheel to select “
1
RETURN”, and press it
twice.
The normal screen appears.
How To Attach The Lens Hood
The provided lens hood helps block out glare when shooting under bright sunlight.
MODE
DEMO
–
ON
OF F
MENU Wheel
Sub Menu
Attach the lens hood to the
ring and push the latch in the
direction of the arrow to fix.
Step-up ring (already attached to
the camcorder) to convert the lens
diameter from 52 mm to 55 mm.
Pull out the lid while pressing
the latches in to remove.
Keep the lid
attached to the
lens hood while
the camcorder is
not in use.
JY-VS200U EN 02-35
01.3.12, 6:55 PM
7
