JVC InteriArt LT-32C31BJE, Service Manual

Page: 13 / 155

(No.YA015)1-13
3.1.9 REMOVING THE SPEAKER
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 5 screws [a], and remove the SPEAKER BOX.
(2) Remove the 4 screws [b], and remove the SPEAKER (L /
R).
(3) Remove the 4 screws [c], and remove the DUCT(L/R).
NOTE:
Since the speaker is attached in a certain direction, attach the
speaker in the same correct direction as it has been attached.
3.1.10 REMOVING THE LCD PANEL UNIT
• Remove the STAND.
• Remove the REAR COVER.
• Remove the POWER CORD.
• Remove the RECEIVER.
• Remove the FRONT CONTROL PWB.
• Remove the FRONT SENSOR PWB.
• Remove the VIDEO PWB.
• Remove the DIGITAL INPUT MODULE PWB.
• Remove the MI-COM & DIST MODULE PWB.
• Remove the POWER PWB.
(1) Remove the 3 screws [d], the 2 screws [e] and the 2 screws
[f] (7 screws in total). Then, remove the FRAME(R).
(2) Remove the 3 screws [g], and the 2 screws [h] (4 screws in
total). Then, remove the FRAME (L).
(3) Remove the 4 screws [j]. Then, remove the CENTER
FRAME.
(4) Remove the 2 screws [k] and the 1 screw [m] (3 screws in
total). Then, remove the TOP FRAME.
(5) Remove the 4 screws [n], and the 2 screws [p] (6 screws in
total). Then, remove the BOTTM FRAME.
(6) Remove the 8 screws [r]. Then, remove the TOP
INVERTER UNIT and BOTTOM INVERTER UNIT.
(7) Remove the 1 screw [q]. Then, remove the LCD PANEL
UNIT.
Fig.2
j
j
d
r
g
k
k
f
e
e
h
h
p
p
m
q
n
a
c
b
b
c
f
r
b
b
j
n
TOP FRAME
CENTERFRAME
FRAME(R)
FRAME(L)
BOTTOM FRAME
LCD PANEL
UNIT
SPEAKER BOX
DUCT
SPEAKER
SPEAKER
DUCT
FRONT PANEL
TOP
INVERTER UNIT
BOTTOM
INVERTER UNIT