ENGLISH
- 21 -
To Stop Automatic Page Change
The teletext page you have selected may con-
tain more information than what is on the
screen; the rest of the information will be dis-
played after a period of time.
Press
button to stop the automatic page
change.
Press
button again to allow the next
page to be displayed.
To Select a Subcode Page
Subcode pages are subsections of long Tele-
text pages that can only be displayed on the
screen one section at a time.
Select the required Teletext page.
Press
button.
Select the required subcode page number
by pressing four digit buttons (e.g. 0001).
If the selected subcode page is not displayed
in a short time, press
button. TV
programme will be displayed on the screen.
Teletext page number will be displayed on
the upper left corner of the screen when the
selected page is found.
Press
button to display the selected
Teletext page.
To exit Teletext
Press
button. The screen will switch to
TV mode.
Fastext and Toptext
Your TV supports the 7 page Teletext system.
When the page number of any of the 7 pages
in memory is entered, the system will not
search for the requested page; instead it will
display the page automatically.
Press
button to move the Teletext
screen forward one page at a time.
Press
button to move the Teletext
screen backward one page at a time.
For Fastext and Toptext
The subject-heading for the information may
have a particular colour.
Press an appropriate
RED
,
GREEN
,
YELLOW
or
BLUE
button in order to reach the relevant
page quickly.
For TOPTEXT
If Toptext transmission is present, colour
coded buttons will appear in status row.
If Toptext transmission is not present, status
row will not appear.
In Toptext mode the
or
com-
mands will request the next or previous page
respectively. If Toptext transmission is not avail-
able, in case of operation of these commands,
wraparound occurs. For example page 100
appears to be one greater than page 199.
Peripheral Equipment
Connections
There is a wide range of audio and video equip-
ment that can be connected to your TV.
Connection diagrams at the end of this sec-
tion show you where the different equipment
should be connected at the back side of the
TV.
Via the Euroconnector
Your TV set has one Euroconnector socket. If
you want to connect peripherals (e.g. video,
decoder, etc.) which have Euroconnectors, to
your TV, use
EXT-1
input.
If an external device is connected via Euro-
connector socket, TV is switched to AV mode
automatically.
RGB mode
If an equipment can output the
RGB
signals,
connect it to the
EXT-1
terminal
.
Via the RCA jacks
If you have an equipment (such as a Cam-
corder) which has the RCA jacks, connect it to
the
EXT-2
terminal with the video and audio
cables.
01-ENG-1525-17MB18-1861UK_15B60SE.p65
30.06.2005, 15:09
21
