AV-32X37SUE AV-32X37HKE
AV-32X37HIE AV-32X35HUE
AV-32X35HKE AV-32H35SUE
1-20 (No.52107)
3.5.2
FOCUS ADJUSTMENT
3.5.3
VSM PRESET SETTING
Item
Measuring
instrument
Test point
Adjustment part
Description
FOCUS
adjustment
Signal
generator
FOCUS 1 VR
(Horizontal line)
FOCUS 2 VR
(Vertical line)
[In HVT]
(1) Receive a cross-hatch signal.
(2) Select the FULL mode.
(3) By turn the FOCUS 2 VR, adjust the picture so that
the part of circle mark on the vertical line may
become thinnest.
(4) Turn the FOCUS1 VR so that the third horizontal line
from the top of the cross hatch screen has equal
thickness in the center of the screen and around the
center.
(5) Make sure that when the screen is darkened, the
lines remain in good focus.
FOCUS 2
HVT
SCREEN
FOCUS 1
FOCUS 2
FOCUS 1
Item
Measuring
instrument
Test point
Adjustment part
Description
VSM PRESET
setting
Remote
control unit
[5.VSM PRESET]
(BRIGHT/SOFT/STD)
1. CONT.
2. BRIGHT
3. SHARP
4. COLOUR
5. HUE
(COOL/WARM/
NOMAL)
1. WDR R
2. WDR G
3. WDR B
(1) Select STD(standard) of PICTURE MODE with the
[MENU] key.
(2) Select 5.VSM PRESET.
(3) Adjust the [FUNCTION UP/DOWN] and [-/+] key to
bring the set values of 1.CONT to 5. HUE to the
values shown in the table.
(4) Press the [MENU] key and memorize the set value.
(5) Respectively select BRIGHT or SOFT of PICTURE
MODE, and make similar adjustment as in 3 above.
(6) Press the [MENU] key and memorize the set value.
(7) Select COOL of COLOUR TEMP with the [MENU]
key.
(8) Select 5.VSM PRESET.
(9) Adjust the [FUNCTION UP/DOWN] and [-/+] key to
bring the set values of 1.WDR R to 3. WDR B to the
values shown in the table.
(10) Press the [MENU] key and memorize the set value.
(11) Respectively select NORMAL or WARM of
PICTURE MODE, and make similar adjustment as in
9 above.
(12) Press the [MENU] key and memorize the set value.
* Refer to OPERATING INSTRUCTIONS for the
PICTURE MODE.
1.CONT.
2.BRIGHT
3.SHARP 4.COLOUR
5.HUE
+7
0
0
0
0
-3
0
-2
0
0
0
0
0
0
0
BRIGHT
SOFT
STANDARD
1.WDR R
2.WDR G
3.WDR B
-15
-9
0
+4
0
0
0
0
0
COOL
WARM
NORMAL
VSM PRESET setting item