JVC InteriArt AV-28E50SK, Instructions Manual

Page: 20 / 62

- 19 -
Selecting Country
• Using “ ” or “ ” button select Country.
• Press “ ” or “ ” button to select the desired coun-
try settings.
Selecting Language
Menu language can be selected by pressing “ ” or
“ ” button on
Language item.
Ext-2 Output
• Using “ ” or “ ” button select Ext-2 Output.
• Press “ ” or “ ” button to select the source which
will be given. From Ext-2 output, either EXT-1, DTV,
EXT3 or TV can be selected.
Blue Back
You can set the TV to automatically change to a blue
screen if the signal is weak or absent, or when there is
no input from an external device.
The
Blue Background feature can be turned on or off
by pressing “ ” or “ ” button.
4:3 Auto Aspect
You can choose one of three Zoom modes, REGULAR,
PANORAMIC or 14:9 ZOOM, as the Zoom mode for the
normal picture (4:3 aspect ratio).
• Using “ ” or “ ” button select 4:3 Autoaspect.
• Press “ ” or “ ” button to select a Zoom mode.
To Store Settings
In Feature menu all settings are stored automatically.
Installation Menu
• Press “ MENU ” button, now you are in MENU . In the
MENU , select INSTALLATION using “ ” or “ ” but-
ton. Then enter the Installation menu by pressing “ ”
or “ ” button.
0(18
3,&785(
6281'
)($785(
,167$//$7,21
352*5$00(
,167$//$7,21
352*5$00(
%$1'
&+$11(/
&2/2856<67(0
'(&2'(5(;7
),1(781,1*
6($5&+
6725(
&
3$/
Selecting Programme
To select programme number, you can use “ ” or “ ”
button or Digit Buttons.
Selecting Band
BAND, can be selected either “C” or “S” by pressing
“ ” or “ ” button.
Selecting Channel
CHANNEL can be changed by “ ” or “ ” button or
Digit Buttons.
For band C,
01 - 83, WEST EUROPE.
01 - 12, 21 - 69, EAST EUROPE .
01 - 17, 21 - 73, UK.
01 - 76, FRANCE.
04 - 09, FRANCE 2.
For band S,
01 - 41, for all channel tables.
Selecting Colour System
Using “ ” or “ ” button on Colour System , you can
change the colour system to PAL, SECAM or AUTO .
Note: In EXT mode, you can choose NTSC 3.58 and
NTSC 4.43 as well.
Selecting Decoder (EXT2)
You can use this mode to connect any decoder to your
TV.
• Press the “ ” or “ ” buttons to turn it on or off.
When you turn Decoder on, EXT-2 output will be cho-
sen as TV mode only and any scrambled channels will
be unscrambled through decoder connected your TV
via EXT-2 output.
Decoder setting should be stored separately for each
programme.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjust-
ment (after coarse adjustment), if you are not happy
with the image on the screen.
Use “ ” or “ ” button on
FINE TUNING item, until
getting the best image on the screen.
In Channel option, normally the Fine Tuning cursor is
placed at the middle on the slider, and this is indicated
with two reciprocal arrows.
Selecting Search
• Using “ ” or “ ” button select Search item.
• Press “ ” or “ ” button in order to start channel
search. “ SEARCHING... ” is displayed during the search
process. Searching is stopped as soon as a station is
found or “ ”, “ ”, “ ”, “ ” buttons are pressed.
JVC-AK49-IDTV-ENG-28&3229W-STEREO-BSI-C1815S-(AV-28&32E50SK)-50066123.p65 24.05.2005, 15:16 19