(No.YA453)1-25
SUB COLOR
Remote
control unit
[2. V/C]
6. COLOR
[Method of adjustment without measuring instrument]
PAL COLOR
(1) Receive a PAL M broadcast.
(2) Set the PICTURE MODE to
BRIGHT
.
(3) Select
2. V/C
from the SERVICE MODE.
(4) Select
<6. COLOR>
.
(5) Set the initial setting value of
<6. COLOR>
.
(6) If the COLOR is not the best with the initial set value,
make fine adjustment until you get the best COLOR.
(7) Press the
[OK]
key to memorize the set values.
SECAM COLOR
(1) Receive a SECAM broadcast.
(2) Follow the same step 2 to 7 as in PAL COLOR.
NTSC 3.58 COLOR
(1) Receive a NTSC 3.58MHz broadcast.
(2) Follow the same step 2 to 7 as in PAL COLOR.
NTSC 4.43 COLOR
• When NTSC 3.58 COLOR is set, NTSC 4.43 COLOR
will be automatically set.
Signal
generator
Oscilloscope
Remote
control unit
TP-47B
TP-E
[CRT SOCKET
PWB]
[2. V/C]
6. COLOR
[Method of adjustment using measuring instrument]
PAL COLOR
(1) Receive a PAL M COLOR bar signal (full field
COLOR bar 75% white).
(2) Connect the oscilloscope between TP-47B and TP-E.
(3) Set the PICTURE MODE to
BRIGHT
.
(4) Select
2. V/C
from the SERVICE MODE.
(5) Select
<6. COLOR>
.
(6) Set the initial setting value of
<6. COLOR>
.
(7) Adjust the value of
(A)
to the value in the voltage
table in the left.
(8) Press the
[OK]
key to memorize the set values.
SECAM COLOR
(1) Receive a SECAM COLOR bar signal (full field
COLOR bar 75% white)
(2) Follow the same step 2 to 8 as in PAL COLOR.
NTSC 3.58 COLOR
(1) Receive a NTSC 3.58MHz broadcast.
(2) Follow the same step 2 to 8 as in PAL COLOR.
NTSC 4.43 COLOR
• When NTSC 3.58 COLOR is set, NTSC 4.43 COLOR
will be automatically set.
Item
Measuring
instrument
Test point
Adjustment part
Description
Voltage setting
PAL
NTSC
VOLTAGE (W-B)
AV-21VT16/P
SECAM
+21V(VDO)
+20(RF)
---
W
C
Y
G
R
M
B
(A)
(-)
(+)
0
Summary of Contents for InteriArt AV-21VT16/P
Page 61: ...22 MEMO ...
Page 62: ...23 MEMO ...
Page 63: ... 2006 Victor Company of Japan Limited 0606 FLE JMT ...
