background image

1-14 (No.YA465)

4.6

BASIC OPERATION OF SERVICE MODE

4.6.1 TOOL OF SERVICE MODE OPERATION

Operate the SERVICE MODE with the REMOTE CONTROL UNIT.

4.6.2 SERVICE MODE ITEMS

With the SERVICE MODE, various adjustments can be made, and they are broadly classified in the following items of settings.

4.6.3 BASIC OPERATION IN SERVICE MODE
4.6.3.1

HOW TO ENTER THE SERVICE MODE

(1) Press the 

[DISPLAY]

 key and the 

[PICTURE MODE]

 key

simultaneously, then enter the SERVICE MODE.

(2) When the main menu is displayed, press any key of the [7]

to [9] key to enter the corresponding sub menu mode.

Fig.1

Fig.2

4.6.3.2

SETTING METHOD

„

 1.IF

[1. VCO] : It must not adjust without signal

(1)

[1]

 key  

Select 1.IF.

(2)

[1]

 key 

Select 1.VCO(CW).
Check the arrow position between the ABOVE REF. and
BELOW REF.

(3)

[DISPLAY]

 key

Return to the SERVICE MODE main manu screen.

„

 2. V/C, 4. DEF

(1)

[2]

[4]

 key

Select one from 2. V/C, 4. DEF.

(2)

[MENU 

/

]

 key 

Select setting items.

(3)

[MENU 

/

]

 key 

Set the setting values of the setting items.

„

 5.VSM W/B

(1)

[5]

 key

Select 5.VSM W/B.

(2)

[OK]

 key 

Select setting items.

(3)

[MENU 

/

]

 key 

Set the setting values of the setting items.

4.6.3.3

MEMORIZE THE ADJUSTMENT DATA

When adjustment is completed, press the 

[OK]

 key to memorize

the adjustment value. If not to do so, the data is not memorized
to the memory IC. And if exit the adjustment mode before to
memorize the data, the adjustment value which you have
changed will be canceled.

4.6.3.4

RELEASE OF SERVICE MODE

After completing the setting, return to the SERVICE MODE, then
again press the 

[DISPLAY]

 key.

1.IF

This mode adjusts the setting values of the IF circuit.

2. V/C

This mode adjusts the setting values of the VIDEO circuit.

3.AUDIO

This mode adjusts the setting values of the multiplicity AUDIO circuit.  

[Do not adjust]

4. DEF

This mode adjusts the setting values of the DEFLECTION circuit for each aspect mode given below.

5.VSM PRESET

This mode adjusts the initial setting values of BRIGHT, STANDARD and SOFT. (VSM : Video Status Memory)

6.STATUS

It is no requirement to adjustment.  

[Do not adjust]

7.PLUG & PLAY (ON) This mode adjusts the setting values of the PIP circuit.  

[Do not adjust]

1. IF
3. AUDIO
5. VSM W/B
7. PLUG & PLAY (ON)

2. V/C
4. DEF
6. S TATUS

SERVICE MENU

1-7 : SELECT

DISPLAY : EXIT

SERVICE MENU

******* **** ***** *****

       **** **** *** ***

EXIT

MENU       key

MENU       key

DISPLAY key

PICTURE MODE

 key

MENU       key

MENU       key

OK key

SERVICE MODE SELECT KEY

Summary of Contents for InteriArt AV-21BX16/L

















































Reviews: