JVC I' Art Pro AV-27S776 User Manual Download

Page: 55 / 80

Button Functions

The display screen shows the current status of timers, inputs, and XDS ID.

Press the D

ISPLAY

button

The screen to the right shows the following information:

•

The current channel or AV input (Channel 05)

• The current time (12:20 pm)
• Sleep timer status/minutes remaining (The Sleep Timer

is off)

• On/off timer status (Set to turn on everyday at 7:00 PM,

off at 10:00 PM)

• Each Press of the D

ISPLAY

button changes the display

mode:

Display

- Full screen shown above

Time

- Shows the current time only

Channel

- Shows the current channel

Off

- Turns display off

Notes:

• You may also turn off the display at any step by pressing M

ENU

• If the clock, sleep timer or on/off timer are not set, the display screen will show:

“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.

Display

05 KLVX PBS

JAZZ FESTIVAL

NOW

SLEEP TIMER

ON/OFF TIMER

ON TIME

OFF TIME

12:20 PM

OFF

EVERYDAY

7:00 PM

10:00 PM

Display

Time

Channel

Off

C.C. (Closed Caption)

Use the C.C. (Closed Caption) button to select the mode of closed caption.

Press the C.C. button

Notes:

• SMART CAPTION is for models AV-27S776, AV-32S776,

AV-30W776 ONLY.

• Smart Caption will appear when you press the Muting button,

only on channels where the broadcast contains closed captioning.

• When you select ON, it will be the mode selected in the Closed Caption Menu.

• See page 40 when you set the caption/text mode.

• You can also change the mode by pressing the

†

buttons.

CLOSED CAPTION

OFF

SMART CAPTION

LCT1855 "B" English 55

10/3/05 10:24:18 AM

Summary of Contents for I' Art Pro AV-27S776

















































































Search results

Summary of Contents for I' Art Pro AV-27S776

Reviews:

Related manuals for I' Art Pro AV-27S776

Brands by name

Popular brands

JVC I' Art Pro AV-27S776, User Manual

Search results

Summary of Contents for I' Art Pro AV-27S776

Reviews:

Related manuals for I' Art Pro AV-27S776

Brands by name

Popular brands