(No.MB455)1-9
3.1.6 Removing the fuse board and voltage selector board
(See Fig.10)
• Remove the metal cover and rear panel.
From the back side of the main body, disconnect the wires from
the connectors (
DCW06
,
DCW07
) on the fuse board and remove
the fuse board with the voltage selector board.
Fig.10
3.1.7 Removing the amplifier board
(See Fig.11)
• Remove the metal cover and rear panel.
(1) From the top side of the main body, disconnect the wire of
the fan motor from the connector
FAN101
on the amplifier
board.
(2) Disconnect the wire from the connector
FAN102
on the
amplifier board and remove the wire from the slot
c
.
(3) Disconnect the wires from the connectors (
AW102
,
AW105
,
CW108
) on the amplifier board.
(4) Disconnect the card wire from the connector
AW104
on the
amplifier board.
(5) Disconnect the card wire from the connector
AW101
on the
amplifier board and remove the card wire from the slot
c
.
(6) Remove the card wire of the tuner from the slot
c
.
Reference:
• Remove the tuner as required.
• When connecting the each wire, pass them through
the slot
c
as before.
(7) Remove the screw
F
and take out the amplifier board from
the main body.
Fig.11
Fuse board
Voltage selector board
DCW06
DCW07
Amplifier board
FAN101
Card wire (for the tuner)
AW101
CW108
AW102
F
c
FAN102
AW104
AW105
