background image

19

HV-34LZ/29WZ / LCT1200-001A-H / ENGLISH

DigiPure

The Digipure function uses the latest in
digital technology to give you a natural
looking picture. The Digipure function
includes the following two functions.

Digipure function:

This function helps to create a natural looking
picture by eliminating unnecessary edges
from high-contrast and crisp images.
Conversely, for images with low-contrast,
edges are added to produce a sharper, more
detailed picture.
You can choose from the DigiPure function
settings of AUTO, MIN and MAX.

Picture motion compensation
function:

This function displays fast-moving pictures
(for example, the players or ball in a football
game) more smoothly and naturally on the
screen.

AUTO:

The TV will automatically adjust the level of
the DigiPure effect to match the amount of
noise in the picture, giving the best possible
picture.

• If you set the DigiPure effect too high on

a low-quality picture that contains a lot of
noise, this may actually make the noise
worse. It is recommended to use the
AUTO setting if you can.

MAX:

The level of the DigiPure effect is set to the
maximum. If you set the DigiPure function to
AUTO but feel that the original picture quality
has not been reproduced fully, change the
setting from AUTO to MAX.

• The MAX setting is not suitable for low-

quality pictures which contain a lot of
noise.

MIN:

The level of the DigiPure effect is set to the
minimum. When you set the DigiPure function
to AUTO and notice some noise, change the
setting from AUTO to MIN.

• The MIN setting is not suitable for high-

quality pictures which contain very little
noise.

OFF:

The DigiPure function is turned off.

PULL DOWN

The PULL DOWN function displays a cinema
film picture more smoothly and naturally on
the screen.

AUTO:

This function is turned on. Normally keep this
function set to AUTO.

OFF:

This function is turned off.

• The motion may appear unnatural when

viewing images with the NTSC colour
system. To make the motion smoother,
switch the PULL DOWN function from
AUTO to OFF.

Using the TV's menu

LCT1200-001A-H_P19-40.p65

9/8/2002, 15:16PM

19

Summary of Contents for HV-29WZ









































Reviews: