JVC HR-XVC29UJ, Instructions Manual

Page: 35 / 88

Masterpage:Right-No-Heading
EN
35
Filename [XVC29U_07S-VHS.fm]
Page 35 14 June 2004 3:52 pm
F
Enter the channel position.
Press CH +/– .
G
Set the tape speed.
Press SP / EP .
H
Return to the normal screen.
Press PROG. or ENTER . “PROGRAM COMPLETED”
appears on the TV screen for about 5 seconds, then the
normal screen appears. If “PROGRAM NOT
COMPLETED PROGRAM OVERLAP” appears on the TV
screen, see page 38.
●
Repeat steps
B
–
H
for each additional program.
I
Engage the unit’s timer mode.
Press TIMER . The unit turns off automatically and “
#
”
appears on the front display panel.
●
To disengage the timer mode, press TIMER again.
To Timer-Record Weekly Or Daily Serials:
— anytime during steps
C
through
G
, press WEEKLY ( number
key “9” ) for weekly serials or DAILY ( number key “8” ) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
NOTES:
●
You can program this unit to timer-record as many as 8
programs. If you try to program the unit to record a ninth,
“PROGRAM FULL” appears on the TV screen. To record the
extra program, you must first cancel any unnecessary
programs. (
墌
pg. 37)
●
Programs that start after midnight must have the next day’s
date.
Cable Box or DBS Receiver Users
To timer-record a satellite broadcast using Express Timer
Programming:
A Perform steps
A
–
I
. Enter “F-1” for the channel position
in step
F
.
B Set the DBS receiver to the appropriate channel before
the selected program begins.
C Leave the DBS receiver’s power on.
XVC29U_07S-VHS.fm Page 35 Monday, June 14, 2004 3:53 PM