background image

46

Setting the JPEG Interval

Press SET UP  MENU in the
stop mode.

Press 

/

 to select “Picture”,

then press 

 or ENTER.

Turn ON the TV and set it to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will
light.)

Preparation:

Setting the JPEG Interval

You can continuously play back all JPEG files automatically.

/Enter/Setup/Return

Language Picture

Parental Other

Sound

Press ENTER.

Press 

 or 

 to select your

desired time.

1

2

3

Press 

 or 

 to select “JPEG

Interval”.

To make SETUP screen disappear, press SET UP MENU.

4

Off:
Plays back one file at a time.

5 Seconds:
Plays back images in the form of a slide show at 5 second
intervals.

10 Seconds:
Plays back images in the form of a slide show at 10 second
intervals.

15 Seconds:
Plays back images in the form of a slide show in 15 second
intervals.

Tv Screen

Display

On

JPEG Interval

Select Files

/Enter/Setup/Return

Language Picture

Parental Other

Sound

Off

All

4:3

Tv Screen

Display

On

JPEG Interval

Select Files

All

/Enter/Setup/Return

Language Picture

Parental Other

Sound

5 Seconds

4:3

Summary of Contents for HR-XVC25U





































































Reviews: