Filename [XV3AS_07S-VHS.fm]
Masterpage:Left+
26
EN
Page 26
February 12, 2004 2:59 pm
OPERATIONS ON VHS DECK (cont.)
G-
CODE
™/S
HOW
V
IEW
™
System Setup
The G-
CODE
timer programming system eliminates the need to
input channel, date, start and stop time data when setting the
timer record function.Simply key in the G-
CODE
number for the
TV programme you wish to record (found in most TV listings)
and the unit's timer is automatically programmed.
You have to set Guide Program numbers, which are assigned to
each station for purposes of ShowView timer programming, for
all the stations stored in your unit's memory to get proper results.
Before G-
CODE
setup you must have performed Auto Setup
(
墌
pg. 13)
IMPORTANT
After setting the Guide Program Numbers, channel positions
may be incorrect if you stored or skipped channels. In this case,
re-perform Guide Program Number setting.
Guide Program Number Set
A
Access the Main Menu screen.
Press
SET UP MENU
.
B
Access the Initial Set screen.
Press
rt
to move the highlight bar (pointer) to "INITIAL
SETUP", then press
OK
or
e
.
C
Access the Guide Program Set screen.
Press
rt
to move the highlight bar (pointer) to "G-
CODE
/
S
HOW
V
IEW
SETUP", then press
OK
or
e
.
D
Enter the Guide Program number.
E
Enter the Receiving channel position number.
F
Return to the normal screen.
Press
SET UP MENU
.
INFORMATION
G-
CODE
and S
HOW
V
IEW
are different trademarks used to
represent the same easy recording feature, but only the term
G-
CODE
system will be used in the instructions. If you use the
S
HOW
V
IEW
system, follow the same instructions listed for
the G-
CODE
system.
Turn on the TV and select the video channel (or AV mode).
Press
rt
or
number keys
to
enter the Guide Program
number for the desired
station as shown in the TV
listings. Then press
OK
or
e
.
G-CODE/SHOWVIEW SETUP
GUIDE PROG
TV PROG
[0-9] OR [ / ]:SELECT
[MENU] : EXIT
2
5
Then press
rt
or
number
keys
to input the number of
the unit
’
s channel position on
which the Guide Program
number
’
s broadcast is
received by the unit. Then
press
OK
or
e
.
●
If the satellite broadcast is
received on your unit's
auxiliary channel “L-1”, select
“L-1” for the channel position.
●
Repeat steps
D
and
E
as necessary.
Guide Program Number
“
Guide Program (GUIDE PROG) number
”
refers to the
assigned TV station numbers,according to broadcast
area, for G-
CODE
timer recording. The Guide Program
numbers can be found in most TV listings.
G-CODE/SHOWVIEW SETUP
GUIDE PROG
TV PROG
[0-9] OR [ / ]:SELECT
[MENU] : EXIT
2
5
XV3AS_01.book Page 26 Thursday, February 12, 2004 4:00 PM
