Masterpage:Right-No-Heading
EN
23
Filename [XV3AS_07S-VHS.fm]
Page 23
February 12, 2004 2:59 pm
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
●
The unit’s power comes on automatically and the counter is
reset to 0:00:00.
●
Select the appropriate colour system with “PAL/MESECAM”
and “NTSC” (
墌
pg. 66).
B
Select the VHS deck.
On the unit
Press
VCR/DVD
repeatedly so that the VCR indicator
lights up.
On the remote control
Press
VCR
so that the VCR indicator lights up.
C
Choose a programme.
Press
PR +/–
or the
number keys
to select the channel
you wish to record.
D
Set the tape speed.
Press
p
. The current setting appears on the front
display panel or TV screen. Press
p
again to change
the setting while the tape speed is displayed on the TV
screen.
●
Each time you press
p
, the mode changes as follows.
SP
{
LP (or EP*)
* EP is for NTSC only.
E
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the unit.
F
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
●
You can select channel during the Record Pause mode.
G
Stop recording.
Press
8
. Then press
x
on the VHS deck to remove the
cassette.
●
Turn on the TV and select the video channel (or AV
mode).
●
Slide the
TV/VCR/DVD
switch to the right.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (
墌
pg. 25)
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
墌
pg. 23, 24, 29), the
recording will resume automatically when power is restored
to the unit unless the unit’s memory backup has expired.
Accidental erasure
prevention
To prevent accidental recording
on a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
Record safety tab
XV3AS_01.book Page 23 Thursday, February 12, 2004 4:00 PM
