Filename [XV3AA_10Subsidiary.fm]
Masterpage:Left+
66
EN
Page 66
February 12, 2004 2:20 pm
SUBSIDIARY SETTINGS (cont.)
8
VIDEO STABILIZER
— ON /
OFF
When this function is set to “ON”, you can automatically correct
vertical vibration in the picture when playing back unstable
recordings made on another recorder.
NOTES:
●
When you finish viewing a tape, be sure to set this function to
“OFF”.
●
Regardless of the setting, this function has no effect during
recording and during special effects playback.
●
The on-screen display may jitter vertically when this function
is set to “ON”.
●
To watch recordings with close-caption, set this function to
“OFF”.
8
AUTO POWER OFF
— 3H /
OFF
When this function is set to “3H”, the unit is turned off
automatically if no operation is done within 3 hours. “AUTO
POWER OFF IN 3 MIN” appears on the screen 3 minutes before
the unit is turned off.
Child Lock
You can disable the unit’s operation.
A
Set the Child Lock.
Press and hold
1
on the remote control for more than
10 seconds while the unit is turned on. The unit turns off,
and “CL“ appears on the front display panel.
●
To release the child lock, press and hold
1
on the remote
control until the unit turns on.
NOTES:
●
When the child lock function is in use, keep the remote
control out of the children’s reach.
●
Timer recording programmes will be performed even if the
child lock function activated.
Scan Mode Set
(DVD deck)
This unit supports the progressive scan system (eg. 480p*) as
well as the conventional interlaced scan system (eg. 480i*).
If your TV equipped with component video connectors, supports
the progressive video input, you can enjoy a high quality picture
by setting the progressive scan mode to active.
●
Refer also the instruction manuals supplied with your TV.
●
If your TV equipped with component video connectors does
not support the progressive video input, do not change the
scan mode to the “PROGRESSIVE”.
* 480p and 480i indicate the number of scanning lines and scanning
format of an image signal.
●
480p indicates 480 scanning lines with progressive format.
●
480i indicates 480 scanning lines with interlaced format.
A
Switch the mode.
During playback or while stopped, press and hold
DVD
on the Remote for more than 3 seconds, to change the
scan mode between Progressive and Interlace mode.
NOTES:
●
It is not possible to change the scan mode when an MP3 or
JPEG disc is loaded.
●
Turn on the TV and select the video channel (or AV
mode).
●
Slide the
TV/VCR/DVD
switch to the right.
●
Turn on the TV and select the VCR channel (or AV
mode).
●
Slide the
TV/VCR/DVD
switch to the right.
XV3AA_01.book Page 66 Thursday, February 12, 2004 2:33 PM
