1-13
SERVICE MODE LIST
This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit or on the main unit and on
the remote control for more than a standard time (second).
Set Key
Operations
CH UP
Adjust the SWITHCHING POINT automatically.
Refer to the “ELECTRICAL ADJUSTMENT” (SWITHCHING POINT).
PLAY/REC total hours are displayed on the FIP.
Refer to the “PREVENTIVE CHECKS AND SERVICE INTERVALS”
(CONFIRMATION OF HOURS USED).
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the “WHEN REPLACING EEPROM (MEMORY) IC”.
Set Key
FF
2
CH UP
STOP
2
CH UP
PLAY
2
Initialization of the factory on VCR.
NOTE: Do not use this for the normal servicing.
If you set a factory initialization, the memories are reset such as
the clock setting, the channel setting, and PLAY/REC total hours.
Standard Time
(seconds)
CH DOWN
POWER
2
VCR operation mode at no connection of DVD.
Refer to the “PREPARATION FOR SERVICING”
NOTE: Although the DVD is connected, the DVD mode cannot be selected.
Set Key
Operations
Remocon Key
Standard Time
(seconds)
REC
5
2
Initialization of the factory on DVD.
NOTE: The function will only work without the setting of DVD disc at DVD
mode.
Do not use this for the normal servicing.
REC
6
2
STOP
1
3
DVD Write mode.
Refer to the “RE-WRITE FOR DVD FIRMWARE”.
NOTE: The function will only work at the DVD stop mode.
Do not use this for the normal servicing.
Check for the firmware version.
Refer to the “RE-WRITE FOR DVD FIRMWARE”.
NOTE: The function will only work at the DVD stop mode.
Do not use this for the normal servicing.
PARENTAL CONTROL - RATING LEVEL
4-DIGIT SECURITY CODE CANCELLATION
If the stored 4-digit security code in the Rating Level menu needs to be cancelled, please follow the steps below.
Turn on the power, and set to the DVD stop mode.
Press the SET UP button to display the DVD menu.
Press the SET +/- button to select the "Operation" menu.
Press the TV/VCR PR +/- button to select the Parental Lock, then press the OK button.
Press the TV/VCR PR +/- button to select the ON or OFF, then press the OK button.
Press the STOP button four times on the remote control, then press the OK button.
The 4-digit security code is cleared.
Press the SET UP button to disappear the DVD menu.
1.
2.
3.
4.
5.
6.
7.
<NOTE> WHEN "N" IS ALWAYS BEING DISPLAYED ON THE TV MONITOR.
(REMOTE CONTROLLER FORMAT)
This product is usable the remote controller which is used by DVD+VHS of the other brand.
If "N" is always being displayed on the TV monitor, can not control from provided remote controller since this product is
other brand format.
• How to return a JVC format.
Turn off the power of the set and push the button and the REC button of the set simultaneously.
Summary of Contents for HR-XV1EU-C
Page 85: ......
Page 117: ......
Page 118: ...VICTOR COMPANY OF JAPAN LIMITED VIDEO DIVISION Printed in Japan S40894 ...
