JVC HR-XV1EU-C Page 12 User Manual Download | Manualshive

Page: 12 / 64

background image

12

Connect to an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
such as Dolby Digital and DTS by using the Coaxial Digital Output.

Use this connection to connect an:
• AV amplifier with built-in *Dolby Digital decoder
• AV amplifier with built-in *DTS decoder

Playback connection

Connect to a Stereo Amplifier with Audio Output

Connecting the optical digital cable

You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital
cable.

When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.
When not using the optical digital cable, attach the dust protection cap to protect against dust.

NOTES:

• The OPTICAL, COAXIAL jacks are useful only for DVD section.

VHS signal is output only from the SCART-sockets, AUDIO L/R jacks and RF OUT jack.

• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV

Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the
speakers to be damaged.

• DTS audio will be output only from the COAXIAL output. To hear DTS audio, DTS-Decoder is necessary.

When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

Coaxial digital cable
(not supplied)

AV Amplifier with
built-in various
decoder as above

DVD/VCR

TV

If your DVD/VCR is connected to a stereo amplifier, the video soundtrack can output through the loudspeakers of
the stereo system.

To Audio (L) Input
To Audio (R) Input

TV

AUDIO Cord (not supplied)

Stereo Amplifier

DVD/VCR

Audio (R) Output

SCART-cable (not supplied)

Audio (L) Output

Coaxial digital

Audio Output

SCART-Socket
(for TV-RGB/Composite)

To SCART
input

SCART-cable (not supplied)

To SCART
input

SCART-Socket
(for TV-RGB/Composite)

2A73501AE(12-15)

4/17/02, 8:22 PM

12

«
...
10
11
12
13
14
...
»

Summary of Contents for HR-XV1EU-C

































































Reviews:

No comments

Related manuals for HR-XV1EU-C

My Music Player

Brand: I.D. AL Pages: 2

Brand: Teac Pages: 64

Brand: Muzio Pages: 7

Brand: T&T Industries Co Pages: 25

Media Giant CM3G Series

Brand: Conceptronic Pages: 2

Brand: Denver Pages: 9

Brand: Tivoli Audio Pages: 92

Brand: Rotel Pages: 11

Brand: Power Acoustik Pages: 31

Brand: Cowon Pages: 52

MultyMedia TS 1

Brand: TechniSat Pages: 91

Brand: Scott Pages: 59

Brand: JVC Pages: 20

Peek-A-Babe CT-60

Brand: Lenoxx Pages: 2

Brand: Curtis Pages: 1

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands