20
To return to the initial sharpness setting, press
CANCEL
while the sharpness setting screen is appearing.
Note:
Playback sharpness
Adjust the sharpness of playback picture during playback.
During slow motion, still picture and picture search,
sharpness-adjusting is impossible.
TIMER REC SET
AUTO REPEAT
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : OK
MENU
EXIT
:
VCR SETUP
[OFF]
1
Start the playback of video tape.
Press
SET UP MENU
.
Press
or
to select
VCR SETUP. Then press
OK
.
Press
or
to select
PLAYBACK SHARP-
NESS. Then press
OK
.
4
Press
or
to adjust
the playback sharpness
to the level you reguire.
5
Press
SET UP MENU
repeatedly until the TV picture
appears on the screen.
2
3
AUDIO MIX
NICAM
VCR SETUP
SELECT :
ENTER : OK
MENU
EXIT :
PLAYBACK SHARPNESS
[OFF]
[AUTO]
PLAYBACK SHARPNESS
+ Ð Ð + Ð Ð + Ð Ð + Ð Ð
SET
:
CANCEL
CENTRE :
MENU
EXIT :
2
softer sharper
Special playback/Playback sharpness/Skip Search
Adjusting tracking condition
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyzes the signal to enable optimum picture quality
during playback.
Notes:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• The Special Playback will automatically change to
playback after approx. 5 minutes to protect the video
tape against excessive wear.
Automatic tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press
SET +
or
SET –
to eliminate the noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
Manual tracking adjustment
To return to automatic tracking, press A. TRK.
Special playback
Slow Motion
During playback press
SLOW
.
You can change the slow speed by the additional
pressing of
SLOW
.
To return to playback: Press
.
VCR
VCR
Reverse picture search function
Press
x 1 or x 2 during the playback.
Picture Search
Forward picture search function
Press
x 1 or x 2 during the playback.
To return to playback: Press
.
Still Picture
Press
4
during playback. To resume normal
playback: Press
.
During playback, press
4
one by one: The picture
advances frame by frame.
To return to playback: Press
.
Frame by Frame picture
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the
SET +
or
–
to reduce the noise bars.
If the still picture jitters excessively, press
SET +
or
–
to stabilize the still picture.
VCR
Skip Search
Each time you press
SKIP SEARCH
while a tape is playing,
the unit will fast-forward ahead 30 seconds on the tape. You
may press the button up to six times in a row to move 180
seconds (three minutes) ahead.
For example: 1 press:
Approx. 30 seconds of tape
2 presses: Approx. 60 seconds of tape
3 presses: Approx. 90 seconds of tape
2A77501B E(18-23)
5/30/02, 9:22 PM
20
